Is It Easy To Install Linoleum Flooring?

Install Linoleum Flooring

Do you want to install linoleum flooring at home? With the passage of time linoleum flooring has made its place in the market and its popularity is increasing day by day. Surprisingly linoleum flooring has gained the popularity equal to wooden flooring. And the quality has dramatically increased over the years. Linoleum is available in a variety of colors and designs. When you consider how easy it is to maintain linoleum flooring, it’s easy to see why it has become so popular.

Linoleum flooring is made of entirely of natural resources, such as:

  • limestone
  • Jute
  • Linseed oil
  • Pigments
  • Cork powdered
  • Wood flour

Tools and materials that are used to install linoleum.

  • 100 pound roller
  • Carpenter Square
  • Knife
  • Scraper
  • Measurement tape
  • Trowel
  • Hammer
  • Chalk
  • Mop
  • Linoleum Tiles

Before you get started

You need to prepare the surface before installing linoleum flooring. Before you begin to install you should leave the floor in or near the job for 24 hours. Temperature plays an important role therefore it is important to maintain the temperature between 65-85 degrees to make unrolling and flattening the floor.

Room dimensions

It is important to consider the size of the room therefore grab the measuring tape and note the size of the room to figure out how much linoleum you need. Make sure you get around 10% more linoleum flooring than the actual dimensions when you measure.

Prepare subfloor

If you decide to remove the existing flooring, pay attention to the subfloor. Linoleum flooring does not adhere well to rough wafer boards, so you’ll probably need to add a layer of plywood before ripping up the previous one.

Remove the furniture and other things

It is important to clear the area before installing linoleum flooring. You should remove all the furniture, baseboards, appliances, and doors. To remove these things you will be needing some tools such as a screwdriver, hammer, pry bar. When putting linoleum flooring, you don’t want to try to work around doorways.

Level up the surface 

Because linoleum has a backing, it doesn’t necessarily require an underlayment, but you should make sure your current floor is level and free of pocks and bumps before installing it. You’ll notice a hump later if you don’t address it, and the flooring may split. Before moving on, use a level to ensure that the floor is level.

Trace the cut lines on the linoleum

This step is the most important one because any small mistake can ruin your flooring therefore, to avoid any mistake you should mark cut lines on the linoleum sheets efore you cut them. Make sure that you carefully cut them and your lines are straight with tape measure.

Cut the linoleum 

Use a knife or jigsaw to cut the linoleum flooring. If you use a knife there is a chance of noe getting accuracy therefore jigsaw is suggested.

Install linoleum

With a notched trowel, apply flooring glue to the subfloor or existing floor. A notched trowel and flooring glue may be found from a home improvement or hardware shop. Before installing the linoleum flooring, make sure to apply a thin, consistent coat of flooring glue. Using a moist towel, wipe away any extra flooring glue as you install linoleum flooring.

Apply linoleum sealant and roll linoleum

After you’ve laid the linoleum, use a floor roller to smooth it out. If you don’t want to buy a floor roller for a one-time activity, investigate if you can rent one from your local hardware or home improvement store. To avoid peeling and potential water damage, put sealant between seams. Linoleum sealant can help you get a lovely shiny surface on your floor.

Leave the floor for at least one day 

Allow the flooring glue to do its job with the linoleum flooring by not allowing any foot traffic on the floor for a full day. You may start reinstalling the appliances, doors, baseboards, and furniture you removed from the room after a day.

Fill up any gaps in the floor with caulk

As you reassemble the room, you may need to caulk some areas. Pay special attention to baseboards, toilets, and other areas near water-using appliances. The best caulk to use is latex or acrylic latex-based caulk.


You should install linoleum flooring, if you are bored of your outdated kitchen and other flooring . Well, it isn’t difficult if you follow these easy steps.

Leave a Comment

Your email address will not be published. Required fields are marked *